Empathy and Samba

I installed Ubuntu 9.10, Karmic Koala, on 2 boxes yesterday. One is on my wife's ThinkPad as dual boot. It occupies 6GB of disk and works as a charm. Another one on my existing Ubuntu 9.04's partition and reuse my /home file system. I had at least two problem when I began to use my new Ubuntu.

The first problem is from Empathy, the substitution Pidgin as an IM client. I got "Network error" when I tried to login my MSN account. I solved this issue by

 killall telepathy-butterfly  

but still feel uncomfortable with its user interface. Maybe I should give Emesene a go or stick with Pidgin.

Another problem is I could not mount my NAS using SMB/CIFS. I got a message box says

Unable to mount location
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)

It turned to be a keyring related defect. My workaround is deleting all the smb entries in Password: default group in Passwords and Encryption Keys.

In my case, it's not a fresh install or an upgrade. Maybe that's the root of the 2 problems I encountered. To be a good trouble shooter, you have to be a good trouble maker.

HTTP Monitor in NetBeans

By default, the HTTP Monitor function in NetBeans 6.7.1 is disabled. To enable it, go to Properties of GlassFish v2.1.

PS Ubuntu 9.10 is out today. It's so hot that I cannot download its torrent file, don't even think about the iso file. Thanks to zsync, I have ubuntu-9.10-desktop-i386.iso on my disk now.

Invoking JavaFX function from JavaScript

As we all know, JavaFX script is very friendly to Java. It's also quite friendly to JavaScript because JavaFX can be run as an applet. Here are the steps to call a JavaFX function from JavaScript side. I use NetBeans 6.7.1, JavaFX 1.2, Ubuntu and Firefox as my development environment.

First, create a JavaFX project (Foo) and set the Application Execution Model to Run in Browser. After it can run correctly, copy Foo.jar and Foo_browser.jnlp in dist/ folder. Usually there are four files in the folder, but we only need three. The other one is needed in step 3.

Second, create a web application and put the two files copied in previous step into the root of the web application.

Third, add an id attribute to the following snippet of Foo.html in dist/ folder of previous project. Copy this piece of code and paste it to the web page that uses the JavaFX applet.

 <script src=""http://dl.javafx.com/1.2/dtfx.js""></script>  
 <script>  
       javafx(  
       {  
         archive: "Foo.jar",  
         draggable: true,  
         width: 250,  
         height: 250,  
         code: "foo.Foo",  
         name: "Foo",  
         id: "Applet"  
       }  
     );  
 </script>  

Finally, use following code to invoke a JavaFX function

  var app = document.getElementById("Applet");  
  app.script.foo(...);  

If you get exception like

message = app.script is undefined

remove the codebase attribute of jnlp element in Foo_browser.jnlp and try again.

Mapped SIP Port & Interdigit Short Timer

I've had a problem with my VoIP for several days. I could not hear any voice from my DID number from last Friday. I opened a ticket to my service provider and they suggested me to try softphone.

I think that's just a useless step because there is no problem with my sipbroker call. Guess what, after I set Ekiga with my SIP details, I can make correct phone calls with my DID number. So there must be something wrong with my ATA.

I performed a user factory reset (877778) for my SPA-1001 and the problem is gone. I checked the settings and found the Mapped SIP Port of both lines are set to 1024, not 5060. Funny.

Another annoying problem is I usually get a timeout when I dial a number from phone book. I think it should be Interdigit Long Timer, which is set to 10 seconds long but I'm wrong. I changed Interdigit Short Timer from 3 to 5 seconds as I have such a slow handset.

The only shortcoming is waiting for 5 seconds after dialling the last digit. No big deal and this can be avoided by appending a # to every number in my phone book.

Making VoIP work for you is so amazing.

Introduce an old scanner to Ubuntu 9.04

Update: below method works with Simple Scan, which replaced Xsane from Ubuntu 10.04, as well.

I bought my scanner several years ago from Zhongguancun. It's an acer s2w 3300u. I love the idea of s2w, scan to web. It's what Google Books is doing. I've been using it to digitalise photos and documents these year, only on Windows.

Since I have a almost Windows-free home now, I planned to try it on Ubuntu. I started Xsane last night, an error occurred

Failed to open device 'snapscan:libusb:003:002': Invalid argument.

This is because the backend of the scanning program, snapscan, doesn't know what kind of scanner it is and which driver to use. Let's try sane-find-scanner and lsusb to figure it out.

 zhao@nettop:~$ sane-find-scanner   
   
  # sane-find-scanner will now attempt to detect your scanner. If the  
  # result is different from what you expected, first make sure your  
  # scanner is powered up and properly connected to your computer.  
   
  # No SCSI scanners found. If you expected something different, make sure that  
  # you have loaded a kernel SCSI driver for your SCSI adapter.  
   
 found USB scanner (vendor=0x04a5 [Color], product=0x20b0 [ FlatbedScanner 22]) at libusb:003:002  
  # Your USB scanner was (probably) detected. It may or may not be supported by  
  # SANE. Try scanimage -L and read the backend's manpage.  
   
  # Not checking for parallel port scanners.  
   
  # Most Scanners connected to the parallel port or other proprietary ports  
  # can't be detected by this program.  
   
  # You may want to run this program as root to find all devices. Once you  
  # found the scanner devices, be sure to adjust access permissions as  
  # necessary.  

 zhao@nettop:~$ lsusb   
 Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device  
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub  
 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub  
 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub  
 Bus 003 Device 002: ID 04a5:20b0 Acer Peripherals Inc. (now BenQ Corp.) S2W 3300U/4300U  
 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub  
 Bus 002 Device 003: ID 0603:00f2 Novatek Microelectronics Corp.   
 Bus 002 Device 002: ID 0d62:a100 Darfon Electronics Corp. Benq Mouse  
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub  

As you can see the system has this model in its database, what I need to do is to find the driver for it. I cannot find its original CD since I can use it without any special driver or application on Windows. But this is not a big problem for this popular scanner. After a quick search, I got u176v040.bin from a zip file. I copied it to /usr/share/sane/snapscan/ and modified /etc/sane.d/snapscan.conf as follows

 # Change to the fully qualified filename of your firmware file, if  
 # firmware upload is needed by the scanner  
 firmware /usr/share/sane/snapscan/u176v040.bin  

All done. Xsane is sort of like GIMP, powerful yet not so friendly. I have to get used to it or find other alternatives, but that's way more simple than driving the scanner up and running.

PS connect the USB cable before power on the scanner.

No more free Ubuntu CD for me

As a long term Ubuntu user (since 5.04), I know I can request a free Ubuntu CD from Canonical via https://shipit.ubuntu.com/. I got the news yesterday that shipit is open for Karmic Koala. I login and got a disappointing message.

You have already received our maximum number of allowed shipments. Please download the CD image and record it yourself.

I don't know there is a limitation. As a overused Ubuntu user, I was banned to view my request history so I don't know what the limitation is. I requested only ONE CD at a time, but not every release, and I hit the limitation after I've been using Ubuntu for 5 years.

From Koala, I won't be a burden of Canonical. I will download image file and burn CD of every new release of Ubuntu. I will continue to tell every possible Ubuntu user the free request service, because I know, before they hit the limitation, they are very likely already a Ubuntu lover.

Enterprise users are new target of Canonical, personal users shouldn't expect too much from it anymore.

UPDATE: Better late than never, here is the official explanation from Canonical, Keeping Ubuntu CDs available

Major Bursary in Science Talent Search 2009

Well, not me, it's my son.

Yesterday, he got a mail from Science Victoria, saying he has been awarded a Major Bursary for his entry of a computer program.

My son began "programming" when he was 6.5 years old while I did the same when I was 13. Does this mean that he is twice as smart as me? I think so. Anyway, hope he enjoys it.

My 1st post

This is my very 1st post here.

I've been a programmer for quite a long time and just realised that I need a place to record what I'm doing right now, basically anything regarding software and programming.

Thanks for watching and hope someone will find this blog useful, and hopefully, interesting.